
VEX-Fld-Ctrl-Inst
(VEX Field Control Instructions)
(NOT for VEXnet.  Intended for the three-team Alliance Splitter board, controlled
by the Vex Robotics Field Control Board..

Refer to http://www.vexrobotics.com/wiki for any updates to this CD.

1. DO NOT attach the Field Control board to your PC until told to do so.
2. Install field control and cp210x drivers per the Installation document.
3. Run the field with the User Guide.


>>> Drivers on this disk ARE NOT COMPATIBLE with "old" Vex Arena Control software. <<<

For assistance installing or running the pier13 tournament manager software, contact pier13.
Innovation First and VEX Robotics do not support pier13 tournament manager software.

Older versions of CP210x drivers are not be compatible with the VEX Field Control program.
Newer versions of CP210x drivers may not be compatible with the VEX Field Control program.
Do not run the VEX Field Control and the pier13 tournament manager software at the same time.  

 

Revisions:
	2009-08-11: Initial release.

